The Leidenfrost Effect: From a 1756 Spoon to Modern Physics
Flick a few drops of water onto a moderately hot frying pan and they sizzle and vanish in a second or two. Heat the pan much hotter and flick again, and something strange happens. The drops bead up into shiny balls, skate around the pan as if on ice, and can last for a minute or more before disappearing. A hotter pan makes the water last longer.
That counterintuitive behavior is called the Leidenfrost effect, after the German physician Johann Gottlob Leidenfrost, who described it in 1756. It happens because the bottom of the drop vaporizes so fast that it builds a thin cushion of steam beneath itself. The drop floats on that cushion, and since steam conducts heat poorly, the drop is partly insulated from the hot metal below.
What began as an observation with a red-hot spoon has turned into a lively field of modern physics. Researchers have made Leidenfrost drops climb uphill, steer themselves across hot surfaces, bounce like trampolines, and cut the drag on objects moving through water. The effect also matters in heavy industry, where an unwanted vapor layer can ruin the hardening of steel or threaten the cooling of a nuclear reactor core.
Who was Johann Gottlob Leidenfrost?
Johann Gottlob Leidenfrost was born in 1715 in Rosperwenda, in what is now the German state of Thuringia. He studied medicine and in 1743 became a professor at the University of Duisburg, where he taught medicine, physics, and chemistry for the rest of his career. He practiced as a physician and wrote on a wide range of medical and scientific topics. He died in 1794.
In 1756 he published a Latin treatise titled De Aquae Communis Nonnullis Qualitatibus Tractatus, which translates roughly as "A Tract About Some Qualities of Common Water." Among its contents was a careful description of what happens to water placed on very hot iron. The treatise was not widely read outside the German-speaking world for a long time. It was not translated from the Latin until 1965.
Leidenfrost was not the first person to notice the phenomenon. The Dutch physician and chemist Hermann Boerhaave recorded an observation of it in 1732. But Leidenfrost studied it more systematically, and it is his name that stuck.
The experiment: a red-hot spoon and a pendulum
Leidenfrost's method was simple. He heated an iron spoon in a fire until it glowed red. Then he placed a drop of water in the spoon and timed how long the drop lasted, counting the swings of a pendulum since he had no precise stopwatch.
He described the drop as not adhering to the hot spoon the way water usually wets cooler iron. Instead of spreading and boiling away, the drop sat on the spoon as a rounded globule, moved around, and slowly shrank. He noted that it lasted far longer on the red-hot spoon than it would on a spoon that was merely hot.
According to Jearl Walker's account of the translated treatise, the first drop deposited in the spoon lasted about 30 seconds, the next lasted only about 10 seconds, and further drops lasted just a few seconds as the spoon cooled. Leidenfrost also remarked that the drop seemed to draw the light and heat out of the spoon, leaving a spot duller than the rest of it. In modern terms, he was watching the spoon fall through the temperature at which the vapor cushion stops being stable.
That threshold is what we now call the Leidenfrost point: roughly the lowest surface temperature at which the vapor cushion can stay stable. Above it, drops levitate. Below it, they touch and boil away quickly.
Leidenfrost did not have a correct explanation for why this happened. The physics of heat, vapor pressure, and fluid flow needed to explain it would not be developed for another century or more. But his description of the phenomenon was accurate, and his timing measurements captured the essential behavior.
What is happening, physically?
To understand the Leidenfrost effect, it helps to know how a liquid behaves as the surface beneath it gets hotter. Engineers describe this with a boiling curve, which shows how fast heat flows from a hot surface into a liquid as the surface temperature rises above the liquid's boiling point.
The modern form of this curve comes from the Japanese engineer Shiro Nukiyama, who published a landmark study in 1934. Nukiyama heated a metal wire immersed in water while measuring its temperature and the heat flowing from it. He found that the relationship between surface temperature and heat flow is not simple. It rises, falls, then rises again.
The main regimes on the boiling curve for water at normal pressure are:
- Natural convection (surface slightly above 100 °C). The water near the surface warms and circulates, but no bubbles form.
- Nucleate boiling (surface moderately hotter). Bubbles form at tiny pits and scratches on the surface and rise away. This is the boiling you see in a pot of pasta, and it is extremely efficient at moving heat. Heat flow climbs steeply as the surface gets hotter, up to a peak.
- The peak, or critical heat flux. Beyond this point, bubbles form so fast that they begin to merge and cover the surface with vapor.
- Transition boiling. Patches of vapor film come and go. Because vapor insulates, heat flow actually drops as the surface gets hotter.
- Film boiling (above the Leidenfrost point). A continuous vapor film separates the liquid from the surface. Heat must cross the vapor by conduction and radiation, which is much less efficient. Heat flow reaches a minimum near the Leidenfrost point and rises again only slowly at higher temperatures.
The Leidenfrost effect is film boiling applied to a single drop. When the drop lands on a surface above the Leidenfrost point, its underside vaporizes almost instantly. The vapor has nowhere to go but out from under the drop, and its pressure pushes the drop up. A thin vapor layer forms, in the range of a tenth of a millimeter or so (Walker describes it as under 0.1 mm at the drop's edge and about 0.2 mm at its center), depending on the drop size and temperature. The drop rests on that layer as long as the vapor continues to be produced fast enough to support it.
Because steam conducts heat more than ten times worse than liquid water (roughly 25 times worse at 100 °C), much less heat reaches the drop than if it were in direct contact with the metal. That is why the drop lasts so much longer.
For background on how and why liquids change into vapor at all, see phase changes: why water boils, freezes, and sublimates.
How hot is the Leidenfrost point?
For water on a typical metal surface at normal atmospheric pressure, the Leidenfrost point is often quoted as about 193 °C (379 °F). In practice it is not a single fixed number. It depends on several factors:
- Surface material and roughness. Rough surfaces can poke through a thin vapor layer and destabilize it, raising the Leidenfrost point. Very smooth surfaces tend to lower it.
- Surface chemistry. Surfaces that repel water, especially textured superhydrophobic coatings, can support a vapor layer at lower temperatures.
- Pressure. Higher ambient pressure raises the boiling point and changes the Leidenfrost point.
- Drop size and impact speed. A drop that hits the surface hard can break through a vapor cushion that would support a gently placed drop.
- Purity of the liquid. Dissolved substances and impurities can change the behavior.
Measured Leidenfrost points for water across different conditions span a wide range, from below 200 °C to well above 300 °C in some studies. The commonly quoted figure is best understood as a typical value for a clean, smooth metal pan.
| Surface temperature (water, typical pan) | What a drop does | Regime |
|---|---|---|
| Just above 100 °C | Spreads and evaporates fairly quickly | Convection to nucleate boiling |
| Moderately hot | Sizzles and vanishes in about a second | Vigorous nucleate boiling |
| Around the Leidenfrost point | Violent spitting, partial contact | Transition boiling |
| Well above Leidenfrost point (often above about 200 °C) | Beads up, skates, lasts a long time | Film boiling (Leidenfrost) |
Drop lifetime does not simply fall as temperature rises. It is shortest in the nucleate boiling regime and jumps up sharply once the vapor cushion forms.
The effect in the kitchen
Cooks use the Leidenfrost effect as a rough pan-temperature test, especially with stainless steel. If drops of water flicked onto the pan sizzle and evaporate, the pan is hot but not very hot. If they bead up and glide around in a single rolling ball, the pan is above the Leidenfrost point.
Some chefs use this as a sign that a stainless pan is hot enough for searing with less sticking. The physics behind the sticking reduction is more complicated than the water test suggests, because oil and food behave differently from a water drop. But the water test is a quick, practical way to read the temperature of a pan without a thermometer.
For a different case where water behaves in a surprising way with temperature, see the Mpemba effect.
Modern research: drops that move themselves
For two centuries after Leidenfrost, the effect was mostly treated as a curiosity or as an engineering problem in boiling heat transfer. That changed in the 2000s, when physicists began studying Leidenfrost drops as a system in their own right. Part of the appeal is that a levitating drop has almost no friction with the surface. That makes it easy to push around, and easy to observe subtle forces acting on it.
Climbing a ratchet (2006)
In 2006, a team led by physicist Heiner Linke published a paper in Physical Review Letters titled "Self-propelled Leidenfrost droplets." They placed drops on a hot surface machined with an asymmetric sawtooth pattern, like a ratchet. The drops moved on their own in a consistent direction, and they could even climb gentle inclines.
The driving forces were small, but because the drop rode on a nearly frictionless vapor cushion, they were enough to send it along the ratchet at a speed of roughly 5 centimeters per second.
The explanation is that the asymmetric teeth direct the flow of vapor escaping from under the drop. The vapor flows preferentially one way along the slopes, and the viscous drag from that flow pulls the drop along with it. Research groups including that of David Quéré in Paris studied this mechanism in detail and showed that even solid pieces of dry ice, which sublimate to vapor on a hot ratchet, move the same way.
Rolling drops and symmetry breaking
In 2018, Ambre Bouillant and colleagues in David Quéré's group in Paris reported in Nature Physics ("Leidenfrost wheels") that Leidenfrost drops initially at rest on a horizontal surface can start to rotate and move on their own, with no external asymmetry. Rapid flow inside the drop is accompanied by a tilting of the drop's base, which acts as a permanent ratchet and entrains the rolling liquid, so the drop self-rotates and self-propels in the direction it is rolling. This helped explain why Leidenfrost drops on a perfectly flat, level pan still wander around rather than sitting still.
Bouncing and trampolining
Soft solids can do something even stranger. In 2017, Scott Waitukaitis and colleagues reported in Nature Physics an "elastic Leidenfrost effect": hydrogel spheres dropped onto a hot surface do not hover but bounce, for minutes at a time, to heights of several times their own diameter, harvesting energy from the vapor in tiny gap oscillations at each impact. Other researchers have studied the oscillations and star-shaped patterns that form when large liquid drops vibrate on their vapor cushions.
Reducing drag in water
In 2012, a team led by Ivan Vakarelski reported in Nature that textured, superhydrophobic surfaces can stabilize a Leidenfrost vapor layer on heated metal spheres plunged into water, so that the vapor layer persists as the sphere cools instead of collapsing into violent nucleate boiling. The same group later reported, in Soft Matter (2014), that such a stable vapor layer around spheres falling through 95 °C water can reduce hydrodynamic drag by up to about 75 percent. It is the Leidenfrost effect turned inside out: instead of a liquid drop floating on vapor over a hot solid, a hot solid travels through liquid surrounded by vapor.
The work attracted interest because reducing drag in water is valuable for ships and underwater vehicles. Practical applications remain limited, since maintaining a hot surface is expensive, but the experiments revealed new ways to stabilize vapor layers using surface texture.
A summary of much of this research appears in the review "Leidenfrost Dynamics" by David Quéré, published in the Annual Review of Fluid Mechanics in 2013.
Why the Leidenfrost effect matters in industry
Outside the kitchen and the physics lab, the Leidenfrost effect is often a problem rather than a curiosity, because it blocks heat transfer at exactly the moment you need it most.
Quenching metals. When steel parts are hardened, they are heated to high temperature and then plunged into water or oil to cool them rapidly. If a vapor film forms around the hot part, it insulates the surface and slows the cooling unevenly. The result can be soft spots, distortion, or cracking. Metallurgists use agitation, additives, and careful control of quenchant temperature to break up the vapor film as quickly as possible.
Nuclear reactor safety. In water-cooled nuclear reactors, fuel rods must transfer heat into the surrounding water continuously. If heat flux rises above the critical heat flux, the rods can become blanketed in vapor, the boiling regime shifts toward film boiling, and the rod surface temperature can rise sharply. Avoiding this boiling crisis is a central design limit for reactors, and understanding film boiling is part of analyzing how cooling water would behave if it reached overheated fuel in an accident.
Spray cooling and electronics. Spraying droplets onto hot surfaces is used to cool steel in mills, engines, and high-power electronics. If the surface is above the Leidenfrost point, the droplets bounce off or skate away instead of absorbing heat efficiently. Engineers design textured surfaces and choose spray parameters partly to suppress the Leidenfrost effect.
Fuel combustion. In engines, fuel droplets striking a hot wall may behave differently depending on whether the wall is above or below the Leidenfrost point, affecting evaporation and combustion.
Dramatic demonstrations, and a warning
The Leidenfrost effect is behind some well-known physics demonstrations:
- Liquid nitrogen on a floor or tabletop. Liquid nitrogen boils at about −196 °C, so a room-temperature floor is more than 200 degrees hotter than its boiling point. Spilled drops skate around on a vapor cushion, just like water on a very hot pan.
- Liquid nitrogen in the mouth or on the skin. Brief contact with liquid nitrogen can sometimes cause no immediate injury because a vapor layer forms. This is extremely dangerous. If the liquid pools, is swallowed, or remains in contact for more than a moment, it causes severe cold burns. Swallowing liquid nitrogen has caused serious internal injuries because the rapidly expanding gas can rupture tissue. Do not try this.
- Wet fingers in molten lead. The physicist Jearl Walker has described briefly dipping wet fingers into molten lead, where the water on the skin vaporizes and briefly protects it. He also warned that the stunt can blow molten lead into the eyes, and that he had been scarred by it, so it should never be attempted.
The vapor layer that makes these demonstrations possible is thin and short-lived. It provides only partial, momentary protection, and the margins for error are small.
Common misconceptions
"A hotter pan always makes water evaporate faster." Above the Leidenfrost point, the opposite happens. Drops last longer on a very hot surface than on a moderately hot one.
"The Leidenfrost point is exactly 193 °C." It is a typical figure for water on a smooth metal surface. The real value depends on the surface, the liquid, the pressure, and how the drop arrives.
"The drop does not touch the surface because of steam pressure alone." Steam pressure is part of it, but the balance also depends on how quickly vapor is produced, how fast it escapes from under the drop, the drop's weight, and its surface tension.
"Leidenfrost discovered it first." Hermann Boerhaave recorded the effect in 1732, more than two decades before Leidenfrost. Leidenfrost's 1756 description was more thorough.
Why the discovery matters
Leidenfrost's spoon experiment is a good reminder that careful observation of ordinary things can reveal deep physics. A physician timing drops on a hot spoon with a pendulum identified a phenomenon that would later sit at the heart of boiling heat transfer, influence how steel is hardened and how reactors are designed, and inspire a new branch of research on self-propelled droplets.
The effect also shows how intuition can mislead. We expect that hotter means faster evaporation. The Leidenfrost effect shows that physical systems can switch between regimes where the rules change. Getting the right answer depends on knowing which regime you are in.
For related reading on how pressure changes the boiling of water, see how pressure cookers change boiling water. For more on what makes water unusual, see how water works.
Key takeaways
- The Leidenfrost effect occurs when a liquid touches a surface much hotter than its boiling point and forms an insulating vapor layer beneath itself.
- Johann Gottlob Leidenfrost described it in 1756 in his Latin treatise on common water, using a red-hot iron spoon and a pendulum to time drops.
- Hermann Boerhaave recorded the effect earlier, in 1732.
- For water on a typical metal pan the Leidenfrost point is often quoted at about 193 °C, but it varies with conditions.
- Shiro Nukiyama's 1934 boiling curve placed the effect in the film boiling regime.
- Since 2006, physicists have shown Leidenfrost drops can propel themselves on ratchets and roll on flat surfaces, hydrogel spheres can bounce on hot plates, and stabilized vapor layers can reduce drag on objects in water.
- In industry, the effect can slow metal quenching and is central to reactor boiling safety limits.
Sources
- Wikipedia - Leidenfrost effect
- Wikipedia - Johann Gottlob Leidenfrost
- Linke et al. (2006) - Self-propelled Leidenfrost droplets, Physical Review Letters
- Physics Today - Drops of liquid exhibit surprising self-propulsion on ratcheted surfaces
- Quéré (2013) - Leidenfrost Dynamics, Annual Review of Fluid Mechanics
- Phys.org - Leidenfrost effect drops are self-propelled (2018)
- Heat Transfer Society of Japan - Nukiyama and the boiling curve
- Walker - Boiling and the Leidenfrost Effect (educational essay)
FAQ
Q: What is the Leidenfrost effect?
A: It is the phenomenon in which a liquid in near contact with a surface much hotter than its boiling point produces a thin, insulating vapor layer and levitates on it. The vapor slows heat transfer, so the liquid evaporates far more slowly than it would at a lower surface temperature.
Q: Who discovered the Leidenfrost effect?
A: Hermann Boerhaave recorded an observation of it in 1732. Johann Gottlob Leidenfrost, a German physician and professor at the University of Duisburg, described it in detail in his 1756 treatise on the qualities of common water, and the effect is named after him.
Q: At what temperature does the Leidenfrost effect happen for water?
A: It is usually quoted as about 193 °C (379 °F) for water on a smooth metal surface at normal pressure. The actual value varies with surface roughness, coating, pressure, and drop size, and can be considerably higher.
Q: Why do water drops last longer on a hotter pan?
A: Above the Leidenfrost point, a vapor cushion forms beneath the drop. Steam conducts heat much less effectively than liquid water touching the metal, so less heat reaches the drop and it evaporates more slowly.
Q: Why do Leidenfrost drops move around?
A: Because they ride on vapor, they have almost no friction, so small forces can push them. Research published in 2018 showed that internal flow in the drop, together with a tilting of its base, can make it rotate and move on its own, even on a flat horizontal surface.
Q: Is the Leidenfrost effect a problem in industry?
A: Yes. In metal quenching, a vapor film can slow cooling and cause uneven hardening. In nuclear reactors and spray cooling, film boiling sharply reduces heat transfer, so engineers design systems to avoid it.
Read next:
Follow new articles
Add SciHub101 to your feed reader to see new science and technology stories.
About the Author
SciHub101 is an independent science and technology publication founded and edited by Buğra Sözeri, a software engineer and app developer based in Türkiye. AI tools assist with drafting and research. Source documentation in the existing archive is uneven, and articles are being reviewed and corrected. The Editorial Team byline identifies editorial responsibility; it does not certify specialist or independent human review. Where we compare products, anything built by our own team is labelled as such — see the editorial guidelines and About page for how corrections and disclosures work.
Related Articles

Fluid Dynamics Without Gravity: ISS Experiments Reveal Flow Mysteries
Microgravity experiments aboard the ISS unlock fluid behavior impossible to study on Earth, transforming heat transfer technology and spacecraft design.
Hess's Balloon Flights: How Cosmic Rays Were Found (1912)
In 1912 Victor Hess carried electroscopes to 5,350 m in a balloon and found radiation rising with height. Here is how the flights worked and what they proved.